The JetGrip Flooring System is a 100% solid, single application, Resinous Quartz Flooring System. The system is hand troweled and slicked to a final thickness of 3/16". The JetRock Flooring System is designed for back-of-the-house applications. Durable to heavy pallet jack traffic, non-yellowing, easy to clean, and low maintenance.
JetGrip™
Benefits
Single-Application, Single Mobilization flooring solution.
Low VOC's, Low Odor
Non-Porous, Anti-Yellowing, Anti-Bacterial Growth
Easy to Moderate Cleaning & Maintenance
Superior Bonding to Multiple Substrates
One-Step post-coating options available
ADA Compliant
LEED credits available
All installers trained by JetRock
Physical Properties:
Compressive Strength 11,369psi
Tensile Adhesion 328psi
Tensile Strength 1,343
Flexural Strength 4,179psi
Coefficient of Friction: Dry 0.55 Wet 0.20
Anti-Slip Coating Dry 0.86 Wet 0.73
Thermal Failure 170F
Absorption 0.38
VOC (g/L) 19
Shore D 80
Specifications
This system is designed for indoor applications in environmentally controlled and enclosed spaces. Ambient and substrate temperature needs to be between 60F and 85F for both product application and cure period. The substrate should be properly prepared and free of any debris, oil and moisture. Installation over new concrete slabs must take place 30 days after the slab was poured, or after the slab has fully cured. For more information, please contact your JetRock representative.
JetShield easy to apply fine mortar, 100% quartz broadcast, and a chemical resistant polyaspartic topcoat, combined for a highly durable, non-slip, easy to clean floor. The mortar spreads out with a gauge rake, quickly filling in minor voids such as grout lines, cracks, holes, and rough spots. This all stand-up application results in a consistant surface and a naturally colorful long term appearance.
JetShield™
Benefits
Low VOC. Very low Odor.
ADA Compliant
Surface Prep: CSP-3 (Diamond Grinding/Light Shot Blasting)
Thermal Shock Resistant
Can be installed in damp environments
No Primers Necessary
Resistant to harsh cleaning chemicals, hot water and steam
All installers trained by JetRock
LEED credits available
Physical Properties:
Compressive Strength 8,500 psi
Tensile Strength 1,400 psi
Tensile Adhesion 400 psi
Flexural Strength 2,700 psi
Coefficient of Friction Dry 0.86 Wet 0.73
Thermal Failure 250-300F
Absorption .04%
Tabor Abrasion (1000 gm. load 1000 cycles, C5 17 wheel) 32 mg Loss
Thermal Compatibility with Concrete Passes
VOC(g/l) 35Shore D Hardness 75-80
Flammability when Bonded to Concrete Self-Extinguishing
Microbial (Fungi) Resistance Passes #1
Coefficient of Thermal Expansion 1.1 x 10-5 in/in/0F
Specifications
This system is designed for indoor applications in environmentally controlled and enclosed spaces. Ambient and substrate temperature needs to be between 60F and 85F for both product application and cure period. The substrate should be properly prepared and free of any debris, oil and pooling moisture. Installation over new concrete slabs must take place 30 days after the slab was poured, or after the slab has fully cured. For more information, please contact your JetRock representative.
The ULTIMATE Quick-Drive Garage System. This ONE-DAY flooring solution is designed for situations where DURABLE COSMETIC BEAUTY along with safety is important and a 1-2 day solution is required. The JetTrex™ Flooring System provides a seamless, grout-free, and durable solution with built-in delamination protection.
JetTrex™
Benefits
Unmatched Combination of Durability & Beauty
JETTREX™ Flooring System outperforms traditional Garage, Shop, and Utility technologies providing shortened installation time and greater durability
JETTREX™ Flooring System provides Exceptional Bond Strength
Extremely cleanable with neoprene squeegee, mop, or deck brush
Specifications
This system is designed for indoor applications in environmentally controlled and enclosed spaces. Ambient and substrate temperature needs to be between 60F and 85F for both product application and cure period. The substrate should be properly prepared and free of any debris, oil and pooling moisture. Installation over new concrete slabs must take place 30 days after the slab was poured, or after the slab has fully cured. For more information, please contact your JetRock representative.